Showroom
Every cable is braided and soldered by hand, so the signal meets as little resistance as possible — and your room keeps only what matters.
A good cable adds nothing to the recording. It only takes away what never belonged there.
Philosophy
A chameleon does not change the forest, it changes itself. A cable works the same way: its job is not to add a character to a system but to disappear inside that particular one.
So we measure. The numbers cannot tell you which cable you will prefer, but they say exactly what a cable does to a signal — and they let nothing hide.
Collections
Every position in a system carries a different kind of signal. No single cable does all four well.
Material & craft
Drag sideways to follow the steps.
01
Cold-drawn solid copper. Resistivity is measured on every spool before it enters the workshop.
02
Pitch sets inductance. Fix the pitch and the measurement repeats from run to run.
03
Silk and linen have a lower dielectric constant than plastic. Wax keeps moisture from moving it.
04
Silver solder, then continuity, capacitance and inductance measured on every finished run.
Selected
Solid copper core, raw silk sleeve
Four solid cores cross-braided by hand, insulated in raw silk and sealed with beeswax. Slow work that no machine reproduces, and it leaves the midrange bare instead of polished.
Conductor
Cold-drawn solid copper, 4NGauge
0.6 mm × 4 (≈23 AWG)Geometry
Hand cross-braid, 25 mm pitchDielectric
Beeswaxed raw silk
Heavy-gauge speaker cable in indigo cloth
Built for systems that need real weight underneath. Two conductor bundles run in parallel, spaced by an ash-wood former so capacitance stays constant along the run.
Conductor
Cold-drawn solid copper, 4NGauge
10 AWG equivalentGeometry
Two parallel bundles on an ash-wood formerDielectric
Beeswaxed indigo-dyed cloth
Triple-shielded power cord
Three independent shields, grounded at one end only to avoid a loop. It does not make music better — it removes a grey floor you had stopped noticing.
Conductor
Cold-drawn solid copper, 4NGauge
12 AWG × 3Geometry
Three-core twist, 30 mm pitchDielectric
Beeswaxed undyed linenHow we work
We publish capacitance, inductance, resistance and impedance for every family — that is the part anyone can verify, and it rules out most of the wrong answers straight away. The rest no number replaces: your system, your room, and a record you have heard a hundred times.
In place
A good cable is one you forget is there. This is how they sit in a room.
A power cord run beneath the floorboards
A living-room system in afternoon light
Close on the terminations behind a valve amplifier
Speaker cable following the skirting board
The interconnect between DAC and pre-amplifier
A complete system in the listening room
Listening room
The room opens by appointment, one guest at a time. Bring your own records — and the cable you use now, so the comparison is direct.
Nothing is sold online — every order starts with a conversation.
